ID: 2725
Mosky ZIP pedal power ISOLATED
€80,00
Geen aanbiedingen geplaatst
Omschrijving
Mosky ZIP pedalpower voeding met 8 geïsoleerde uitgangen. Heeft praktisch dezelfde kwaliteiten als de Voodoolab Pedalpower 2plus. Werkt helemaal naar behoren en komt kabeltjes en doosje. Ik heb hieronder wat informatie erbij gezet. Ophalen kan in Leiden, verzenden op kosten van de koper (6,95) via postNL
Input
230V 50/60Hz (European model)
Built-in R-transformer,8 complete isolated, filtered and stable output parts, also very quiet.
Output DC Voltage Max current
1-4 (ACA) 9V 100mA each
5-6 9V 300mA each
7-8 9V 100mA each
DIP Switch: ON
Output DC Voltage Max current
1-4 12V 100mA each
5-6 12V 300mA each
7-8(SAG) Adjustable 4V-9V 100mA each
Dimensions: 160 x 100 x 50 mm
Weight: 0,94 Kg
Filter, regulate, isolate, and protect!
9/12V (x4) Standard 9V and 12V Boss ACA
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Boss pedals that specify the PSA adapter operate at 9V like most other pedals.
Boss pedals that require the ACA adapter operate at 12V which can be selected via switches underneath the Pedal Power 2 Plus. Any one of these outputs can be individually selected to run at 9V or 12V.
9V (x2) High Current 9V and Line 6 Modelers
These two outputs each deliver 300mA allowing you to run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler. Via switches underneath the Pedal Power, these two outputs can be separately configured for regulated (Boss Twin Pedals) or unregulated (Line 6 Modelers) power allowing you to run both units if so desired. These outputs can also power any standard 9V effects as well.
9V (x2) Standard 9V With Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V. This feature can be enabled via the bottom panel switches.
The SAG control is mostly useful for transistor-based fuzz, octavia, and distortion circuits, as most modern opamp designs are minimally affected by variations in supply voltage.
We recommend turning SAG off if youre going to run digital pedals like delay, chorus, and reverb.
Input
230V 50/60Hz (European model)
Built-in R-transformer,8 complete isolated, filtered and stable output parts, also very quiet.
Output DC Voltage Max current
1-4 (ACA) 9V 100mA each
5-6 9V 300mA each
7-8 9V 100mA each
DIP Switch: ON
Output DC Voltage Max current
1-4 12V 100mA each
5-6 12V 300mA each
7-8(SAG) Adjustable 4V-9V 100mA each
Dimensions: 160 x 100 x 50 mm
Weight: 0,94 Kg
Filter, regulate, isolate, and protect!
9/12V (x4) Standard 9V and 12V Boss ACA
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Boss pedals that specify the PSA adapter operate at 9V like most other pedals.
Boss pedals that require the ACA adapter operate at 12V which can be selected via switches underneath the Pedal Power 2 Plus. Any one of these outputs can be individually selected to run at 9V or 12V.
9V (x2) High Current 9V and Line 6 Modelers
These two outputs each deliver 300mA allowing you to run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler. Via switches underneath the Pedal Power, these two outputs can be separately configured for regulated (Boss Twin Pedals) or unregulated (Line 6 Modelers) power allowing you to run both units if so desired. These outputs can also power any standard 9V effects as well.
9V (x2) Standard 9V With Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V. This feature can be enabled via the bottom panel switches.
The SAG control is mostly useful for transistor-based fuzz, octavia, and distortion circuits, as most modern opamp designs are minimally affected by variations in supply voltage.
We recommend turning SAG off if youre going to run digital pedals like delay, chorus, and reverb.